WEN 3962 Band Saw with Stand Review

The WEN 3962 band saw with stand is designed for some serious cutting. It’s equipped with a 3.5-amp motor, which is enough power to ensure you’re able to easily slice through even hardwoods. This is a two-speed model that can slice through anything at 1520 or 2620 feet per minute, depending on what you’re cutting.

The saw’s blade comes in at ten inches, but unlike many newer models of band saws, the 3962 features a 9 ¾ inch throat which allows the user to get the most out of the blade.

WEN Band Saw Overview and Features

WEN 3962 Band Saw

This WEN model also comes with a stock miter gauge and fence, stand, and work light. The flexible work light does a great job of illuminating large work spaces easily.

  • The saw’s three in one dust port can be used to keep the blade debris-free once you attach a shop vac.
  • The saw itself features a two-year product warranty that covers defects and breakage caused by normal wear and tear.
  • The 3962 is considered a mid-range model, and one that’s reliable and sturdy.
  • The two cutting speeds offer much-needed versatility, as does the miter gauge and rip fence.
  • The dust port will accept three different sizes of shop vac hoses.

This saw is able to cut boards six inches deep and up to 9.75 inches wide, with seventy-two-inch blades that range from 1/8 to half an inch for different types of elaborate cuts.

Quick Tip: This saw comes equipped with a large work table that features dimensions of fourteen by twelve and a half inches, with bevels up to forty-five degrees to the right for when the user wants an angled cut with the miter.

The included bearings ensure that the blade is able to operate efficiently and smoothly. The stand will require some assembly, but the included instructions are clearly written, making assembly a fast process.

This saw weighs in at seventy-three pounds and comes with a six-foot cord.

So, what can you expect in terms of cutting performance? Let’s break it down for you.

Like any ten-inch model, you can expect a saw that’s somewhat flimsier than a tougher, beefier fourteen-inch band saw.

Band saws in this price range feature more vibration and less horsepower, and more control options. When it comes to performance and cutting capacity, this WEN model is about as good as you’ll get in a saw of this size.

When the saw is set up correctly, it offers a truly impressive performance. However, the downside is, it can also be pretty difficult to adjust, especially if you’ve never used a band saw before.

WEN 3962 close upThe performance to cost ratio is also pretty good. This is a high-performance saw and one that comes with some necessary extras that will come in handy if you’re doing little or medium sized jobs around the home.

Now, when it comes to saw assembly, the process is very straightforward. All you’ll need to do is attach the cross supports and steel legs using the included hardware, then attach the worktable.

Next, you can install the blade and start making any necessary adjustments in order to get your saw up and running. This is where things start to get a little tricky because this model happens to be incredibly sensitive to adjustments.

Its performance can also be very unforgiving if the saw is adjusted incorrectly. Setting the saw up with the stock blade is very time-consuming.

However, making some minor adjustments to blade tension and tracking will definitely make a major difference when it comes to performance, so taking the time to find the sweet spot is essential.

Because there are no markings on the tension spring, the setup can be complicated.

For this particular model, being that it’s not very newbie-friendly, you’ll really have to make your adjustments based on trial and error.

Unfortunately, the tension adjustment knob is made out of plastic, so it can be easy to tighten it way too much and cause the knob to pop right off. So, our advice? Go slowly.

Many pros also recommend spending some time experimenting with the blade tracking and the bottom and top guide bearings. Once you have made the right adjustments, you’ll simply be blown away by the power this saw packs.

A beefier, bigger machine can cut with a little more precision, but we were pleasantly surprised at just how tough this smaller ten-inch model really is.

Band Saw by WEN Pros and Cons

3962 Two-Speed Band Saw open doors

Pros: If you have experience with band saws, you’ll love the type of power the 3962 offers. Yes, adjusting the saw every time you want to change out the blade can be a nightmare at times, but ultimately, for the price, this saw is worth every penny.

Cons: As we have mentioned, adjusting this saw can be a long and complicated process, however, the saw’s performance is significantly improved once these adjustments have been made.

Of course, if you don’t have any experience in this area, we recommend having a friend handle this job for you.

If you want to change out the blade for more aggressive cuts, you’ll have to go back and handle the same setup challenges, however, they’ll be much more complicated the second time around because a thinner blade is more sensitive to tracking adjustments.

The location of the work light is a little confusing, considering it’s mounted on the back, making it practically useless.

If you’re looking for a more user-friendly model, the Craftsman ten-inch band saw is a little easier to adjust and handle, and it’s available at a comparable price.

WEN’s Power Packed Band Saw Final Thoughts and Rating

Love it or leave it, you really can’t beat the price. You’ll get some useful extras, and a saw that can handle small and medium sized jobs around the home.

Consumers who purchased the WEN 3962 band saw gave it a rating of five out of five stars which make it one of the best band saws on the market and our top-rated product.

Check the best price for the WEN3962 band saw